1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ROM GFIVE G9 – ROM Android 4.2.1

Discussion in 'G-Five - FAQ, Guide, How To, Tutorials' started by Abraham, May 12, 2013.

Tags:
  1. Abraham

    Abraham Well-Known Member Registered ✔ Verified ✔

    Joined:
    Jan 26, 2013
    Messages:
    408
    Likes Received:
    202
    Trophy Points:
    43
    Gender:
    Male
    Download Links:
    GFIVE G9
    Flashtool
    SP MDT


    ROM GFIVE G9 – ROM Android 4.2.1

    Features ROM:

    1, the resolution of the camera is fixed
    2, optimize the photographic effect of the camera
    3, fixes seven automatic light sensor
    4, the rate is automatically adjusted to reduce power consumption
    5, by adding data / app and Remove Programs
    6, the default boot optimization, and modify the memory card read speed
    7, the abolition of the virtual keys
    8, add the root

    Language support: Multilang



    Install ROM :

    To unpack Flash run Flash_tool.exe
    Select a the MT6589_Android_scatter_emmc.txt in ROM
    Click Flash_tool.exe interface Firmware-> Upgrade

    Phone after taking the battery in put something
    Connect the data cable
    Brush finished with green circles appears



    Install with SP MDT:

    Unpack the archive SP_MDT_exe_v3.1304.00_A2013.02.26.rar and archive with the ROM

    1). Turn off the smartphone. Cable is not connected to the computer.

    2). Remove the battery and insert it again

    3). Connect your phone to a computer cable. The operating system detects a new device

    4). Disconnect the cable from the computer.

    5). Run SPMultiPortFlashDownloadProject.exe

    6). Configuration du fichier source de données et spécifiez le fichier MTK_DATABASE.mdb (il est dans le dossier SP_MDT).">Choose Database Factory menu> Configuration File data source and specify the file MTK_DATABASE.mdb (it is in the folder SP_MDT).

    7). Ouvrir un fichier Agent de téléchargement et de spécifier le fichier MTK_AllInOneDA.bin (il est dans le dossier SP_MDT).">Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

    8). Click File and select the MT6589_Android_scatter_emmc.txt file (it's in the folder with the rom).

    9). The other parameters are fixed, as in the screenshot below.

    10). Click "Start all".

    11). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer, remove and insert the battery and reconnect it to the computer.

    12). After (OK) click Stop and disable any phone.

    13). Completed.

    or

    CWM