1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RX10 Rivo PZ10 Flash File

Discussion in 'Rivo Mobiles - FAQ, Guide, How To, Tutorials' started by AIiMraN, May 6, 2016.

Tags:
  1. AIiMraN

    AIiMraN Well-Known Member Registered ✔ Verified ✔

    Joined:
    Feb 1, 2016
    Messages:
    189
    Likes Received:
    163
    Trophy Points:
    43
    Gender:
    Male
    RIVO_Phantom_PZ10_V5_emmc_qcn-official factory firamware

    RIVO_Phantom_PZ10_V5_emmc_qcn-official factory firamwear.rar

    How to flash:

    Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
    Turn off the phone. Hold Vol+ button and plug-in USB Cable. Phone will vibrate one time, screen wil be black. This is DownloadMode.
    There should be device called in device management:
    Qualcomm HS-USB QDLoader 9008 (COMXX)
    In any other case u have to install drivers manually.
    Run QFIL.
    Click Browse… in Programmer Path and choose prog_emmc_firehose_8916.mbn
    Load XML in Download Section:
    First select RawProgram File: rawprogram0.xml
    then Select Patch File: patch0.xml
    Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:

    [​IMG]
     
    • Like Like x 1