1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I5 Q-Mobile i5 Stock Firmware

Discussion in 'QMobile - FAQ, Guide, How To, Tutorials' started by M0YAL, Jun 27, 2015.

  1. M0YAL

    M0YAL ✱ Subscribers ✱ Verified Customer

    Joined:
    Jan 4, 2015
    Messages:
    936
    Likes Received:
    713
    Trophy Points:
    143
    Gender:
    Male
    Q-Mobile i5 Stock Firmware..

    Download From here : Download

    Installation process
    1. Power on your PC as this process will require a PC, USB cable and Qmobile.
    2. Download Drivers, Flashtool and Qmobile stock ROM from the link given above.
    3. Extract Drivers zip file in a folder
    4. Install Drivers and after installation reboot your PC once.
    5. Now you have to extract Flashtool and Run Flash_tool.exe
    6. Extract Stock ROM rar file in a folder.
    7. Click on Download tab in flashtool and click on Scatter-Loading
    8. Now browse to the ROM folder and select MTxxx_Android_scatter.txt and click Open
    9. Now you have to Click on Download button.
    10. Power off your QMobile and take out its battery for a couple of seconds.
    11. Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
    12. If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
    13. Now you can Safely Remove your Phone from PC and power it on.
    Congratulation, You have successfully Installed.
     
    • Like Like x 3
  2. Vladislav

    Vladislav ✮ Junior Member ✮ Registered ✔ Verified ✔

    Joined:
    Mar 16, 2015
    Messages:
    40
    Likes Received:
    85
    Trophy Points:
    18
    Gender:
    Male
    tested flash file i5

    pasworld : jamilmobile okara

    :) use volcano box & miracle.
     
    • Like Like x 2
  3. Vladislav

    Vladislav ✮ Junior Member ✮ Registered ✔ Verified ✔

    Joined:
    Mar 16, 2015
    Messages:
    40
    Likes Received:
    85
    Trophy Points:
    18
    Gender:
    Male
    • Like Like x 2
  4. YellowBoss

    YellowBoss ✮ New Member ✮ Registered ✔ Verified ✔

    Joined:
    Feb 11, 2015
    Messages:
    5
    Likes Received:
    3
    Trophy Points:
    3
    Gender:
    Male
    QMobile i5 [MT6582] Scatter File [CM2MTK]

    Operation : Flash [ v1.25 ]

    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 72 ]
    Sync...
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6582
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6582_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 90014A4834473164040503A2C8EF324F
    DA Stat : v4.2 on BBID : 0x87
    DA Sent. Configure setting now ...
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0090 , OEM : 014A
    [eMMC] : FLASH_INF : d1G4
    [eMMC] : FLASH_CID : 90014A4834473164040503A2C8EF324F
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    INT RAM : 0x00020000
    EXT RAM : 0x20000000
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    ScatCFG : BaseBand : MT6582 , Project : s4700 , Storage : EMMC
    Setting : Flash Pre-Erase (Safe) : Enabled
    Setting : AFF verify : Enabled

    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Check eMMC compatibility
    BL : eMMC supported by BootLoader!

    BL : Flash Pre-Erase
    Total blocks to Erase : 2
    Erase : 0x0000000000C00000-0x0000000000100000
    Erase : 0x0000000002900000-0x00000000E4700000
    Flash Pre-Erase Done, time used : 00:00:09

    SecCfg Passed , 1799
    BMT remark not need. Will skip
    Sending Preloader ...
    Use : preloader_s4700.bin
    Preloader Sent , Init passed
    SecCfg Passed , 1799
    PartCount : 0012

    Processing : Flash Write
    Flash now : MBR
    Image Flash Ok
    Flash now : EBR1
    Image Flash Ok
    Flash now : UBOOT
    Image Flash Ok
    Flash now : BOOTIMG
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : SEC_RO
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : ANDROID
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USRDATA
    Image Flash Ok
    Flash Write Done, time used : 00:02:36

    Processing : Verify
    Verify Passed : MBR
    Verify Passed : EBR1
    Verify Passed : UBOOT
    Verify Passed : BOOTIMG
    Verify Passed : RECOVERY
    Verify Passed : SEC_RO
    Verify Passed : LOGO
    Verify Passed : ANDROID
    Verify Passed : CACHE
    Verify Passed : USRDATA
    Data Verify Done, time used : 00:00:47

    Update RomInfo done

    Done!
    Elapsed: 00:03:46
    Reconnect Power/Cable!
     
    • Like Like x 1
  5. ayub

    ayub ✮ New Member ✮ Registered ✔

    Joined:
    Oct 26, 2015
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    i have flashed qmobile i5i stock rom in qmobilei5 now is shows only white screen and i am unable to flash its's stock rom back because my computer shows my mediatek preloader v com but a yellow bar below it. have any idea.
     
  6. M0YAL

    M0YAL ✱ Subscribers ✱ Verified Customer

    Joined:
    Jan 4, 2015
    Messages:
    936
    Likes Received:
    713
    Trophy Points:
    143
    Gender:
    Male
    this is i5 firmware not i5i

    Here is QMobile i5i__QMobile i5i__4.4.2__ALPS.KK1.MP1.V2.1
     
  7. ViVo

    ViVo Moderator Staff Member Customer Support Registered ✔

    Joined:
    Jan 11, 2013
    Messages:
    488
    Likes Received:
    409
    Trophy Points:
    63
    Gender:
    Male
    • Like Like x 1
  8. aemy

    aemy ✮ New Member ✮ Registered ✔

    Joined:
    Sep 11, 2016
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Female
    My Q mobile i5 is now struck on Q Mobile Logo. Please Guide me what should i do??
     
  9. Abi Wyeamn

    Abi Wyeamn Well-Known Member Registered ✔ Verified ✔

    Joined:
    Jan 27, 2016
    Messages:
    534
    Likes Received:
    133
    Trophy Points:
    93
    Gender:
    Male
    Download Flash File & do this:

    Installation process
    1. Power on your PC as this process will require a PC, USB cable and Qmobile.
    2. Download Drivers, Flashtool and Qmobile stock ROM from the link given above.
    3. Extract Drivers zip file in a folder
    4. Install Drivers and after installation reboot your PC once.
    5. Now you have to extract Flashtool and Run Flash_tool.exe
    6. Extract Stock ROM rar file in a folder.
    7. Click on Download tab in flashtool and click on Scatter-Loading
    8. Now browse to the ROM folder and select MTxxx_Android_scatter.txt and click Open
    9. Now you have to Click on Download button.
    10. Power off your QMobile and take out its battery for a couple of seconds.
    11. Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
    12. If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
    13. Now you can Safely Remove your Phone from PC and power it on.
     
  10. ghanee786

    ghanee786 ✮ New Member ✮ Registered ✔

    Joined:
    Nov 8, 2016
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    i have q mobile i5 dual sim and i installed rom by using above procedure. it all works fine but 1 sim is not being detected. can any body give mr solution?
     
  11. ghanee786

    ghanee786 ✮ New Member ✮ Registered ✔

    Joined:
    Nov 8, 2016
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    i have q mobile i5 dual sim and i installed rom by using above procedure. it all works fine but 1 sim is not being detected. can any body give mr solution?
     
  12. AIiMraN

    AIiMraN Well-Known Member Registered ✔ Verified ✔

    Joined:
    Feb 1, 2016
    Messages:
    189
    Likes Received:
    163
    Trophy Points:
    43
    Gender:
    Male