1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Oppo R831K Flash Done

Discussion in 'Infinity Products' started by Aldo Podja, Oct 31, 2016.

  1. Aldo Podja

    Aldo Podja ✮ Junior Member ✮ Registered ✔ Verified ✔

    Joined:
    Feb 27, 2016
    Messages:
    44
    Likes Received:
    16
    Trophy Points:
    8
    Gender:
    Female
    Scatter Load Ok , BaseBand : MT6572 , Project : OPPO72_14079 , Storage : EMMC
    Files found : 13 , Set to Flash : 12
    Ready to Flash!

    Operation : Flash [ v1.58 ]

    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 9 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A483447316404050CA1AD0C71C7
    Initialize Memory ...
    DRAM configured from ScatFW!
    DRAM initialize passed!
    DRAM size : 0x40000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , d1G4
    [eMMC] : FLASH_CID : 90014A483447316404050CA1AD0C71C7
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0xA2A98871483069BC27A199640B1F4DFC
    INT RAM : 0x00020000
    EXT RAM : 0x40000000 [1 GiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    ScatCFG : BaseBand : MT6572 , Project : OPPO72_14079 , Storage : EMMC
    Setting : Flash Pre-Erase (Safe) : Enabled
    Setting : AFF verify : Enabled
    Setting : HW verify : Enabled

    Switching to HSUSB
    HSUSB Init Ok
    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Check eMMC compatibility
    BL : eMMC supported by BootLoader!

    BL : BatteryLevel : 3728 mV
    BL : BatteryLevel Ok

    BL : Flash Pre-Erase
    Total blocks to Erase : 4
    Erase : 0x0000000000C00000-0x0000000000100000
    Erase : 0x0000000002900000-0x0000000001A80000
    Erase : 0x0000000004480000-0x0000000002000000
    Erase : 0x0000000007480000-0x0000000080900000
    Flash Pre-Erase Done, time used : 00:00:03

    SecCfg Passed , 1799
    BMT remark not need. Will skip
    Sending Preloader ...
    Use : preloader_OPPO72_14079.bin
    Preloader Sent , Init passed
    SecCfg Passed , 1799
    PartCount : 0017
    Update PMT by user request
    Repartition Done!
    Use FLN Mode

    Processing : Flash Write
    Flash now : MBR
    Image Flash Ok
    Flash now : EBR1
    Image Flash Ok
    Flash now : UBOOT
    Image Flash Ok
    Flash now : BOOTIMG
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : SEC_RO
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : EBR2
    Image Flash Ok
    Flash now : ANDROID
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USRDATA
    Image Flash Ok
    Flash now : FAT
    Image Flash Ok
    Flash Write Done, time used : 00:03:20

    Processing : Verify
    Verify Passed : MBR
    Verify Passed : EBR1
    Verify Passed : UBOOT
    Verify Passed : BOOTIMG
    Verify Passed : RECOVERY
    Verify Passed : SEC_RO
    Verify Passed : LOGO
    Verify Passed : EBR2
    Verify Passed : ANDROID
    Verify Passed : CACHE
    Verify Passed : USRDATA
    Verify Passed : FAT
    Data Verify Done, time used : 00:00:06

    Update Mirror PMT
    Update Done!

    Update RomInfo done

    Done!
    Elapsed: 00:03:57
    Reconnect Power/Cable!