1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Octoplus JTAG PRO Software v.1.1.6 is out!

Discussion in 'Octopus/Octoplus' started by Abraham, Jul 29, 2016.

  1. Abraham

    Abraham Well-Known Member Registered ✔ Verified ✔

    Joined:
    Jan 26, 2013
    Messages:
    408
    Likes Received:
    202
    Trophy Points:
    43
    Gender:
    Male
    Samsung Factory Repair feature has been released!

    Octoplus Box JTAG PRO Software v.1.1.6 Release Notes: Added Samsung Factory Repair feature!

    You can try to repair Samsung devices via eMMC by using original Samsung firmware * ("*.tar", "*.md5" versions of firmware are supported!).
    This feature can be useful in case, if you haven’t got the working device to prepare Repair file or haven’t got a chance to read out Full flash; or device you want to repair currently is not supported.

    Improved Content Extractor:

    - Increased speed of FS analysis, reading and parsing data from device
    - Fixed issue with pictures preview

    Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software. All pinouts and repair procedures described in the manual ("Help" button in the software)

    * NOTE: not all versions of firmware contain necessary partitions for repairing! Try to write different firmware.



    [​IMG]

    Download Octoplus JTAG PRO Software v.1.1.6
     
    • Like Like x 1