1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Modify Cable For Samsung Mobiles By GsmMarhaba

Discussion in 'Samsung - FAQ, Guide, How To, Tutorials' started by marhabano1, May 9, 2016.

  1. marhabano1

    marhabano1 Well-Known Member
    pakistan
    Registered ✔

    Joined:
    Oct 16, 2015
    Messages:
    213
    Likes Received:
    182
    Trophy Points:
    43
    Gender:
    Male
    Devices:
    Note 5

    Modify Cable For Samsung Mobiles
    if your device Volume Down Or Home key Damaged and your device not have download mode access.
    then you can try this cable its a Magic No need to put device in Download mod manually just Connect cable and See Magic
    This cable also work on LG Boot loop recovery if Your Lg Device No download Or Upgrade Mode You can Also Try This Its Relay Work As a Magic .

    For Magic Cable Required:
    1 Good quality USB Cable
    1 Paper Cutter
    1 301k
     
  2. Aldo Podja

    Aldo Podja ✮ Junior Member ✮
    India
    Registered ✔ Verified ✔

    Joined:
    Feb 27, 2016
    Messages:
    44
    Likes Received:
    16
    Trophy Points:
    8
    Gender:
    Female
    Thanks, but i think just buy a usb jig only 1 USD ;-)

    [​IMG]
     
  3. marhabano1

    marhabano1 Well-Known Member
    pakistan
    Registered ✔

    Joined:
    Oct 16, 2015
    Messages:
    213
    Likes Received:
    182
    Trophy Points:
    43
    Gender:
    Male
    Devices:
    Note 5
    But its work like a Normal USB Cable No extra jig or Extra investment
     
  4. AliBaBa

    AliBaBa ✮ Active Member ✮
    Pakistan
    Registered ✔ Verified ✔

    Joined:
    Feb 1, 2015
    Messages:
    72
    Likes Received:
    52
    Trophy Points:
    18
    Gender:
    Male
    Devices:
    Samsung S6
  5. Aldo Podja

    Aldo Podja ✮ Junior Member ✮
    India
    Registered ✔ Verified ✔

    Joined:
    Feb 27, 2016
    Messages:
    44
    Likes Received:
    16
    Trophy Points:
    8
    Gender:
    Female
    ======READ THIS==READ THIS==READ THIS==READ THIS==READ THIS======
    I DO NOT TAKE CREDIT FOR THIS WONDERFUL TUTORIAL, ALL CREDIT TO THIS TUTORIAL GO'S TO GALAXYS2ROOT.COM
    I ONLY TAKE CREDIT FOR TAKING THE TIME TO MOVE THIS HERE, SO PLEASE PRESS THE THANKS BUTTON


    If you’ve soft bricked your Galaxy S2 (and can’t get into download mode) or you want to reset the ODIN download counter (so no one will no you’ve rooted your Galaxy S2), or you just simply
    want to remove the i9100 splash screen, you can make a USB jig to solve all your problems.

    What is a USB jig?

    USB jig is a simple circuit that allows you to reset the download mode and also get into it for Samsung smartphones (can work on other Samsung phones besides the Galaxy S2) just in case something goes wrong. On a soft brick, this can save your phone as it will enter into download mode. Think of it as a reset switch.

    You can buy a USB jig on Amazon for around $6-10 or for about $2, you can make your own. It’s a really simple circuit that involves putting 300K Ohms of resistors between pin 4 and 5 of the microUSB connector.

    Here’s how to make your own for $2!

    You can order a micro USB cable for $1 on Amazon and pick up 300K resistors for about $1. (or you can use 3 100K resistors in series, which is what I did since Radio Shack didn’t have 300K resistors)

    Step 1. Cut the micro USB connector off your micro USB cable.
    [​IMG]

    Step 2. Start taking off the plastic on the side with heavy-duty scissors or knife until you get to the metal bones.
    [​IMG]

    Just cut it all the way until you can access all FIVE pins.
    [​IMG]

    Although every microUSB connector is different, mine had all the pin soldered except for pin 4 (which is shown by the arrow below), this is the pin that’s unused, so it was easy for me to identify. You need to connect a resistor in between this pin 4 and pin 5. Pin 5 is located to the right of pin 4.
    [​IMG]

    Below is what the pins look like for microUSB:
    [​IMG]

    Step 3. You will need resistors, I am using 100K Ohm resistors I bought at Radio Shack.
    [​IMG]

    Step 4. Since the pins are so darn small, it’s going to be rather hard to solder the resistors right onto it. So I got 2 insulated wire pieces and solder them onto the pin 4 and pin 5.
    [​IMG]

    Step 5. Below shows my wires soldered securely onto pin 4 and pin 5.
    [​IMG]

    Step 6. Since I don’t have a 300K Ohm resistor, I am simply going to put three 100K Ohm resistors in series and solder them, this is actually pretty fun to do.
    [​IMG]

    Step 7. Last step is simply soldering the resistor piece onto the wires and voila, USB Jig is done. It took me about 15 minutes at most and I haven’t soldered for around 3 years so not too bad so long as it works. You can make it nicer by putting some hot glue over it then putting it in a case but I like having bare circuits, I can always make new ones if I break it.
    [​IMG]

    Step 8. Below shows my ODIN download count over 400+ on my Epic 4G Touch Galaxy S2. This is before using the USB Jig.
    [​IMG]

    Step 9. I turn the phone off then insert my new USB Jig, hoping that I did it right the first time.
    [​IMG]

    Step 10. After about 3 seconds, my Epic 4G Touch Galaxy S2 boots up by itself to download mode, my “custom binary download” count reset to zero and says “erasing download information succeeded”. Congrats!
    [​IMG]

    Step 11. I reboot the phone and find the i9100 boot splash gone!
    [​IMG]

    Next I used the jig on my AT&T Galaxy S2 and worked fine. This USB Jig works on all Samsung devices that support it.

    By resetting your download mode count, you’ve truly erased any history that you’ve rooted your phone.



    IF YOUR HAVING ANY TROUBLE EITHER POST YOUR QUESTION HERE
    OR CHECK OUT THIS VIDEO


    THE ORIGINAL POST IS HERE
    http://forum.xda-developers.com/show....php?t=1331782
    ======READ THIS==READ THIS==READ THIS==READ THIS==READ THIS======
    I DO NOT TAKE CREDIT FOR THIS WONDERFUL TUTORIAL, ALL CREDIT TO THIS TUTORIAL GO'S TO GALAXYS2ROOT.COM
    I ONLY TAKE CREDIT FOR TAKING THE TIME TO MOVE THIS HERE, SO PLEASE PRESS THE THANKS BUTTON
     
  6. Anna Pidlubna

    Anna Pidlubna ✮ Junior Member ✮
    Chennai
    Registered ✔ Verified ✔

    Joined:
    May 27, 2015
    Messages:
    21
    Likes Received:
    9
    Trophy Points:
    3
    Gender:
    Male
    Thanks for sharing helpful information, I really like your all post.