1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Install TWRP Recovery & Root Sprint Galaxy S6 G920P

Discussion in 'Samsung - FAQ, Guide, How To, Tutorials' started by Alaina, Apr 12, 2016.

  1. Alaina

    Alaina ✮ Active Member ✮
    Bucharest
    Verified Customer Registered ✔

    Joined:
    Oct 16, 2015
    Messages:
    65
    Likes Received:
    39
    Trophy Points:
    18
    Gender:
    Female
    Devices:
    Galaxy S7 Edge
    Galaxy S6 for Sprint carries the model number SM-G920P. The device is getting space in pockets of customers slowly now. Specifications of the Galaxy S6 G920 are same as that of the standard Galaxy S6. The only difference is, this variant comes under the umbrella of Sprint and carries a different model number. One good thing about Sprint is, it doesn’t put restrictions on the bootloader of its devices like At&t & Verizon. The Galaxy S6 too doesn’t have any such restriction, that means users will be able to install custom stuff on the device and gain the root access. Since the Galaxy S6 is a pure beast, chances are most of the users won’t be able to resist themselves from going ahead and keep themselves restricted to the stock condition of their device. For Android enthusiasts, root access and a nice custom recovery is a must have. To save some time of yours, we’v found the working custom recovery and a method to root the Sprint Galaxt S6 SM-G920P. As you move ahead, you will be able to install TWRP on your Sprint S6 G920 and gain the root access afterwards. Let’s go through some early-preps and begin with the process then.

    Early preparations & instructions

    1. After following this guide, you will be done with
      1. TWRP recovery and root Sprint Galaxy S6 G920P
    2. Do not try this guide on any other device. Check your device’s model number under settings > general / more > about device. Trying this method on any other device will result in bricking it.
    3. Make sure that your phone’s battery is charged at least over 50%. This is recommended in order to avoid power issues during the installation process.
    4. Enable USB debugging mode on your device. To do so, you need to enable developer options first. Go to settings > system > about device > tap build number for 7 times. You will have developer options enabled under settings > system > developer options. Open developer options now and enable USB debugging mode.
    5. Use original data cable to establish connection between your PC and your phone.
    6. While using Odin3, disable Samsung Kies, Windows Firewall or any Anti-Virus if you’ve enabled.
    7. To be on the safe side, backup your contacts, call logs, text messages and copy the important media content to your PC.
    8. Download the files properly for your device and follow the instructions to the letter to avoid mishap.
    Disclaimer: The methods involved in flashing custom recoveries, roms and rooting your phone are highly custom and may result in bricking your device, and has nothing to do with Google or the device manufacturer that is SAMSUNG in our case. Also rooting your device will void its warranty and you will be no longer eligible for any kind of free device services by the manufacturers/warranty providers. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

    [​IMG]

    Required Downloads & Installations

    How To Install TWRP Recovery & Root Your Sprint Galaxy S6 G920P

    1. Copy SuperSu.zip file to your phone’s internal storage.
    2. Open Odin3 V3.10.6.exe that you extracted on your PC.
    3. Put your phone in download mode now. To do so, turn it off completely. Now turn it on by pressing and holding Volume Down + Home + Power Key. Once your phone boots up, press the Volume Up key to continue.
    4. Connect your phone to your PC now. The ID:COM box in the top-left corner of Odin3 should turn blue. This indicates that your phone is connected properly.
    5. Now click the “AP” tab in Odin and select the twrp-2.8.6.0-zerofltespr.img.tar file. It will take a second or two for Odin3 to load this file.
    6. If the Auto-reboot option is ticked, untick it. Leave all other options in Odin3 as they are.[​IMG]
    7. Now you’re all set to flash the recovery. Just click the start button in Odin3 and sit back.
    8. Once the process box above ID:COM box shows green light and flashing process is finished, disconnect your device.
    9. Keep the power key pressed for a while and turn it off.
    10. Now turn it on by pressing and holding Volume Up + Home + Power Key. This will boot your device in recovery mode. It should be TWRP recovery that you just installed.
    11. Now in TWRP recovery, select Install > locate the SuperSu.zip file and flash it.
    12. Once flashed, reboot your device.
    13. Checkout the SuperSu in application drawer. Also install BusyBox from Play Store.
    14. Verify root access using Root Checker.
    15. That’s al. You’re now set to unleash the open source nature of Android.
    Just in case you’re facing any difficulties following this procedure or you’re stuck with something, feel free to reach me out in the comment box below. Thank you.
     
    • Like Like x 1