1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HELP

Discussion in 'Chinese Models - Cloned Phones' started by Sarmad Ali, Apr 11, 2016.

  1. Sarmad Ali

    Sarmad Ali Well-Known Member Registered ✔

    Joined:
    Mar 9, 2015
    Messages:
    418
    Likes Received:
    216
    Trophy Points:
    43
    Gender:
    Male
    samsung 7582 after flash with sp mobile break.
    I have also scatter backup-CM2 tool. How write backup???

    Operation : Flash [ v1.45 ]

    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 12 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6575
    BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
    Processing BROM stage
    i2c Init : 00000000
    SpeedSet : 0000
    VChrgSet : 0x28 , BatStat : 0x02
    WD Disable stat : 0x0000
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
    Sending and initialize DA ...
    Running DA ver.3.2 on BBID : 0x84
    Initialize Memory ...
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
    [eMMC] : FLASH_CID : 1501004E4A5330304D00D495281E601D
    [eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : B5AE54C7B59EF1622A26597627F525CF
    INT RAM : 0x00020000
    EXT RAM : 0x00000000
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    ScatCFG : BaseBand : MT6575 , Project : MTK6575 , Storage : eMMC
    Setting : Flash Pre-Erase (Safe) : Enabled
    Setting : AFF verify : Enabled
    Setting : HW verify : Enabled

    Switching to HSUSB
    HSUSB Init Ok
    DRAM not initialized , will try init now
    DRAM init failed! Break Flashing! Wrong Firmware or HW error!



    Operation Failed
    Elapsed: 00:00:42
    Reconnect Power/Cable!
     
  2. sohail ali

    sohail ali ✮ Active Member ✮ Registered ✔

    Joined:
    Mar 5, 2016
    Messages:
    71
    Likes Received:
    36
    Trophy Points:
    18
    Gender:
    Male
    Bro miracle box par try karo
     
  3. Sarmad Ali

    Sarmad Ali Well-Known Member Registered ✔

    Joined:
    Mar 9, 2015
    Messages:
    418
    Likes Received:
    216
    Trophy Points:
    43
    Gender:
    Male
    Thanks problem solved:
     
  4. sohail ali

    sohail ali ✮ Active Member ✮ Registered ✔

    Joined:
    Mar 5, 2016
    Messages:
    71
    Likes Received:
    36
    Trophy Points:
    18
    Gender:
    Male
    Kese hoyi problem solved
     
  5. Sarmad Ali

    Sarmad Ali Well-Known Member Registered ✔

    Joined:
    Mar 9, 2015
    Messages:
    418
    Likes Received:
    216
    Trophy Points:
    43
    Gender:
    Male
    chang
    Changing firmware.......