1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

[Guide] All Huawei (Android) Stock Rom Installation Guide.

Discussion in 'Huawei - FAQ, Guide, How To, Tutorials' started by Silent Angel, Apr 12, 2014.

  1. Silent Angel

    Silent Angel Qmobile Supporter Customer Support Registered ✔

    Joined:
    Jan 20, 2015
    Messages:
    593
    Likes Received:
    801
    Trophy Points:
    143
    Gender:
    Male
    IF you have downloaded Dload/Update.aap based firmware follow this procedure to install firmware on your device.

    ROM install

    Step one : Prepare an SD card, it is recommended to use Kingstone, or Kingmax, size is recommended that more than 1G.

    Step Two : Formatting SD card (optional).

    Step Three : copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.

    Step four : Check the root directory of the SD card you dload UPDATA.APP.

    Step Five : SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

    Step Six : The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

    OR

    Step one: Prepare an SD card, it is recommended to use Kingstone, or Kingmax, size is recommended that more than 1G.

    Step Two: Formatting SD card (optional).

    step three : copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.

    Step four: Check the root directory of the SD card you dload UPDATA.APP.

    Step Five: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

    Step Six: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

    Good Luck.