1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A Guide to Flashing Official ROM Lenovo S860 Version S860_S122_140405

Discussion in 'Lenovo - FAQ, Guide, How To, Tutorials' started by Silent Angel, Apr 7, 2015.

  1. Silent Angel

    Silent Angel Qmobile Supporter Customer Support Registered ✔

    Joined:
    Jan 20, 2015
    Messages:
    595
    Likes Received:
    803
    Trophy Points:
    143
    Gender:
    Male
    A Guide to Flashing Official ROM Lenovo S860 Version S860_S122_140405 - Lenovo S860 is a new phone because of that there is still a few tutorial or guide on how to modified or how to flashing a original stock ROM.

    Because this reason i will try to post on How to Flashing Official ROM for Lenovo S860, this original ROM just support EN and CN languages only, no ROOT and no Gapps. But this is ROM use Android 4.2.2 so maybe it more easy to gain ROOT and install GAPPS.

    Disclaimer :This guide for educational purpose only, We not responsible if your device bricked after following this tutorial.

    Downloads :
    A Guide to Flashing Official ROM Lenovo S860
    1. First because Lenovo S860 use un removeable battery so error in this process will make you open Lenovo S860 case and plug off battery connector. So i think this is a high risk tutorial better to consider it first before continued to next step.
    2. After finish downloaded all files needed to this tutorial now extract all files on the same folder, you will get S860_S122_140405 on this folder your you need extract again target_bin because all needed file is in here, SP_Flash_Tool_v3.1328.0.183 and Mediatek PreLoader USB VCOM Driver
    3. First install the Mediatek PreLoader USB VCOM Driver to your computer, this is not an exe file so must be install manually.
    4. Now check for Mediatek PreLoader USB VCOM Driver are perfectly install or not, Turn off your device and connect to your computer. Look at My Computer ↦ Manage ↦ Device Manager look for Mediatek PreLoader USB VCOM if you can found it then you already successful install it.
      cdb546d37e34a9fb58603ff34c180baf.png
    5. Discconect your device from your computer, don't turn on your device. Now Open SP_Flash_Tool_v3.1328.0.183, Check on DA DL All With Check Sum this is very important don't forget. Now Click on Scatter-Loading and navigate to file S860_S122_140405/Target_bin/MT6582_Android_scatter_emmc.txt once you found the scatter file and select on it all field will be automated fill it.
      2af03146ed055f86d4fba3549a2154e0.jpg
    6. Now just hit the Download Button or press F9 the flash tool will start to initialized just wait a minute, Remember your device is turn off now connect your device to your computer. When driver install perfectly the flash tool will recognize the device and start to begin flashing process, it will mark with progress bar begin with RED BAR,and after a minute or two YELLOW BAR and if it finish will be mark with GREEN CIRCLE in the middle of flash tool.
      Warning : Don't interrupt the flashing process, or your device will be brick
      ba564aeb003bd0ef7276fa38bc216c04.jpg

      656ff45b375957a9d6b6a654a2e602f5.jpg

      280f194dfa15eb534ba3efc432724a4c.jpg

      5cab94371c3a0cbe6e24f094a8a89b2f.jpg
    • Done, Your device will reboot automatically and will be boot with the new ROM S860_S122_140405, Confirm the firmware on System Settings ↦ About
    Congratulations !! now you can use SP Flash Tool for flashing your device, Just remember this guide is very high risk so do it with careful. Thank you for reading this guide don't hesitate to leave any comments if you has problem regarding this guide if i can i will help you thank you...
     
    Last edited: Apr 7, 2015